1. Manually Adjust Entire Track Grid Traktor Pro 3 1 For Mac
2. Manually Adjust Entire Track Grid Traktor Pro 3 Crack
3. Manually Adjust Entire Track Grid Traktor Pro 3 1

Get your cursor lined up to a good beat grid marker, and click the Adjust Grid From Current Position button. This locks down the grid points to the left of the cursor. Skip ahead a few bars until you see the grid points off-beat, then use the Shrink or Expand buttons to line up the grid again. Check your work against the metronome.

on Nov 13, 2013 in DJ & Live Performance 0 comments

The Track BPM Detected by TRAKTOR is Half or Twice the Original BPM of the Track. During the analysis of a track, TRAKTOR may the tempo of a track to half or twice the original tempo. 65 BPM or 260 BPM instead of 130 BPM). In order to fix this, open the Beatgrid panel below the Deck where the track is. DJUCED analyses every track loaded into a deck (Tempo and Key), then automatically set a Beat Grid. To ensure the best benefits of the Beat FXs, Loops, Slicers and other performances tools, the Beat Grid needs to fit perfectly the track loaded into the deck. Grid mode allows correcting a mis-detected beat grid manually. How do you scroll through a track by using the touch strip on the Denon DJ MCX8000? Hold down the platter and move your finger along the touch strip to search through a track. The length of this strip represents the length of the entire track. Place your finger on a point along this sensor to jump to that point in the track. Proceed as follows: cue manually to a beat of the music and leave the track paused in that position. This will give you something like the picture on the left side. The playback position (red line) is on a beat while the (snapped) cue point is on the next grid line. You can shift the grid of any song within rekordbox by placing it in performance mode, then loading the track into a deck. After that underneath the area where the waveforms are displayed there is two panels you can switch between, one of which allows you to shift the best grid and even adjust small tempo miscalculations that may have happened.

One of Traktor's powerful commands is the Sync feature. A highly useful function, Traktor's Sync gives you the ability to lock the tempos of two or more tracks together. When utilized correctly, this powerful tool allows Traktor to take care of beat-matching, which gives you the space and freedom to make creative musical decisions during your set.

If you're going to be using the sync function, it's a good idea to have an understanding of the following sync-related features and functions in Traktor:

Master Clock

Traktor has a Master Clock whose tempo will determine the tempo of the tracks that are Synced. You can access the Master Clock by pressing the metronome in the upper left hand corner of the GUI.

Phase: Phase is a term used to describe the position of one sound wave relative to another sound wave.

In relation to DJing, two songs are 'in phase' when the drum hits in each songs' waveforms match each other, and are out of phase when the drum hits in each song are out of alignment with each other.

Traktor has a phase meter that displays the phase of each song. To display the phase meter, open the Traktor Preferences. In the Decks section, under Deck Heading, click 'Show Phase Meter' to display the phase meter.

Beat Grid: A beat-grid is the white lines that are placed overtop of Traktor's analyzed tracks that correspond to the song's drum hits, and tell Traktor the BPM of the track. Once set correctly, beat grids will enable to you to perfectly sync your tracks in time.

In Traktor 2, there are three different types of Sync available for you to use.

Manually Adjust Entire Track Grid Traktor Pro 3 1 For Mac

Here's a breakdown of the different versions, so you can choose which type of Sync is best for you.

Beat Sync

Beat Sync is Traktor's default Sync mode, and is activated when you press the Sync command in the GUI. It can also be selected in Traktor's Preferences, under Transport/Sync Mode/Beat Sync. When you press Beat Sync, the song's tempo and phase are matched to the tempo and phase of the Master Clock.

Beat Sync will not work properly without an accurately placed beat grid on your chosen track. You can use the auto grid function when you import songs into your collection, and if needed, adjust your beat grids to properly position them.

Tempo Sync

Tempo Sync is available in the MIDI commands, (in Traktor's Preferences/Transport/Sync Mode) not the GUI. When engaged, the tempo of the selected deck matches the tempo of the Master Clock. It is useful for quickly matching up the tempos of your tracks, but you will still need to carefully match the phases of the tracks using your ears if you use this mode.

Phase Sync

Phase Sync is available in the MIDI commands. A one time command, when engaged the tracks's phase will match the master source but the two are not locked together.

Beat Gridding

Before you begin to play sets using Beat Sync, you'll need to ensure that your beat grids are correctly placed on your tracks.

Here's what a beat grid that is properly placed looks like:

Manually Adjust Entire Track Grid Traktor Pro 3 Crack

If your beat grid looks like this, you'll need to fine tune it:

Here's a reliable method you can use to adjust your beat grids.

First, you're going to want to have Traktor automatically set the Beat Grid when loading tracks. Since Traktor does a good job of correctly placing Beat Grids, this will ensure that the adjustments you make to the Beat Grids are minimal.

Open Traktor Preferences, and navigate to File Management. In the File Management section, check 'Analyze new tracks when loading into deck'. You can also choose to select 'Analyze New Imported Tracks'. In the BPM Detection section, make sure 'Set Beat-Grid when detecting BPM' is checked too.

Next, navigate to Output Routing. In Mixing Mode, Select 'External'. Make sure you set an Output for Deck A (eg. Your sound card)

In the Master Panel, turn on the Metronome in the Options section by selecting 'Tick'.

Next, click the headphones (cue) button in Deck A. This allows you to hear the tick of Traktor's metronome.

Load up a new track into Deck A, and have a look at the white markers that are now displayed on the track after it has been analyzed; this is Traktor's auto Beat Grid. Zoom in on the waveform by pressing the 'plus' arrows on the right hand side of the waveform to have a closer look at how the Beat Grid is positioned on the track.

Press Play and Sync on Deck A; your song will sync to the Master Clock. Listen to how the track sounds when compared to the sound of the metronome; you need these two to perfectly match.

Click on the Grid button (located on the left hand side, underneath the track), and use the two top left or right arrows to adjust the Beat Grid position until it's perfectly positioned on the drum hits in the track.

Once your Beat Grid is adjusted, click the small lock button (located to the right of the arrows) to secure the grid in place.

You'll get quicker at adjusting your beat grids as you continue to practice this method. Try to set up a few beat grids at a time (eg. When you import new tracks each week) rather than trying to set them all up over your entire collection in a few days.

I believe that by using the Sync functions available in Traktor, you'll be able to enhance your sets by focusing on more creative elements, rather than spending all your time beat matching. Now that you've learned about what each Sync mode allows you to do, you'll be able to make a solid decision about which type of Sync is best for you.

In most cases, I recommend DJs use the Beat Sync function to ensure your tracks are synced correctly. If you're working with Beat Sync, I do recommend that you spend time preparing your sets by properly adjusting all your Beat Grids. A little effort spent on preparing your tracks will go a long way, and help you to rock the crowd during your sets!

I have been receiving a bunch of questions from people about their playlists. Many of you are having difficulty moving tracks within Traktor playlists, in other words, people have been unable to re- order tracks once you have created a playlist. You want to drag the tracks into a specific order, but Traktor just won’t let you!

Traktor Playlist Problem

The Track Browser contains a lot of different columns, the first column being the ‘icon’ column. If you click the top of this this column, the tracks are then organized depending on what icons are showing:-

• Lock – Tracks will be organized based on their locked state. Which means those that have their beats grids locked, will appear at the top.
• Check mark or tick – Tracks will be organized based on their played state. Which means if a track has already been played in the most recent session it will appear at the top of the list.
• Exclamation Mark – Tracks will be organized based on their missing status. Which means if a track can not be located by Traktor, then it will be marked with this exclamation icon and once sorted by this means, will be placed at the top of the playlist.

As you click the top of this first column, you will toggle between these three icons. Whilst the tracks are organized in one of these ways, you are unable to drag your tracks around to manually sort them into your preferred play order.

The Fix

Manually Adjust Entire Track Grid Traktor Pro 3 1

Simply click the top of the second column, the number column. This column, the one titled with a hash simple (#), will remove the icon in the top of the first column and therefore free you up to drag and drop your tracks around into your preferred playlist order.

More great tutorials

If you found this article helpful, then you may also be interested in the following:-

Organizing your music files – traktortips.com

Exporting a playlist to USB – traktortips.com

Creating Playlists Quickly – traktortips.com